+25
citizenalpha
sire-bd
niklos92
Redwing
silver samourai2
the liar
MrKami
nanjysan
yugioh
ynko
le Gardien
Furet03
doom
darthstitch
jarod1974
ydol
Das
micky willis
Rody Siffrecco
madeira7
american psycho
supwil
Obscure Creator
Galactus
Nightstar1441
29 participants
Stranger Bust Size
jarvis69- Admin
- Nombre de messages : 17688
Age : 61
Date d'inscription : 31/01/2009
- Message n°26
Re: Stranger Bust Size
Why not ?
__________________________________________________
american psycho- Statues collector
- Nombre de messages : 448
Age : 54
Date d'inscription : 13/05/2009
- Message n°27
Re: Stranger Bust Size
scale him with the surtur bust.
citizenalpha- Peintre / Painter
- Nombre de messages : 341
Age : 53
Localisation : Cypress, Texas
Date d'inscription : 02/01/2012
- Message n°28
Re: Stranger Bust Size
If he were scaled with Surtur, he would be out of scale with any possible Overmind bust in the future.
mimic- Ultime collector
- Nombre de messages : 5269
Age : 66
Localisation : saint-germain-en-laye
Date d'inscription : 31/01/2009
- Message n°29
Re: Stranger Bust Size
Overmind is 10 inches tall, not a dwarfcitizenalpha a écrit:If he were scaled with Surtur, he would be out of scale with any possible Overmind bust in the future.
Nightstar1441- Statues collector
- Nombre de messages : 217
Age : 53
Localisation : South Carolina
Date d'inscription : 22/01/2012
- Message n°30
Re: Stranger Bust Size
I'd go with the arms on a slightly smaller scale. This will help with space and displayability and give the character more definition than just the head
Stranger always adjusted his size based on the situation so having one that is not enormous should not matter.
Stranger always adjusted his size based on the situation so having one that is not enormous should not matter.
citizenalpha- Peintre / Painter
- Nombre de messages : 341
Age : 53
Localisation : Cypress, Texas
Date d'inscription : 02/01/2012
- Message n°31
Re: Stranger Bust Size
I thought long and hard about it and he has to have arms. Let's assume for a minute that there would be a matching Overmind kit. Overmind is 10' tall and the Stranger can vary his height so let's just call them both 10 feet tall to make a matched set. There are 120 inches in 10 feet and if we divide that by 8 for a 1/8th scale, that gives us 15 inches. The human body is roughly 8 heads tall, with the waist to the top of the head generally measured as 3 heads tall. So 3/8ths of 15 would be 5.625" or 14.3cm for the torso. Put him on a 3" base and he tops out at 8.625" (+/- a little for hair...or helmet in the Over-Mind's case) which is 21.9cm tall. did I do the math right? A 10' tall stranger or Overmind in 1/8th scale would be 5.625' (14.3cm) from waist line to the top of the head? If so then the stranger would come in at just under 9" and Overmind would be slightly taller because of his helmet.
They would both tower over most other busts. The USAgent bust is only 5 5/8" in total height just as an example. Would this be large enough to make most everyone happy?
If so, I would like to get this project assigned to a sculptor asap.
They would both tower over most other busts. The USAgent bust is only 5 5/8" in total height just as an example. Would this be large enough to make most everyone happy?
If so, I would like to get this project assigned to a sculptor asap.
american psycho- Statues collector
- Nombre de messages : 448
Age : 54
Date d'inscription : 13/05/2009
- Message n°32
Re: Stranger Bust Size
you can make Stranger as big as Surtur and Overmind as big as the planet hulk bust. Sutur is much bigger then the plant hulk bust and the planet hulk bust is far taller then the normal bowen bust.
american psycho- Statues collector
- Nombre de messages : 448
Age : 54
Date d'inscription : 13/05/2009
- Message n°33
Re: Stranger Bust Size
example.
citizenalpha- Peintre / Painter
- Nombre de messages : 341
Age : 53
Localisation : Cypress, Texas
Date d'inscription : 02/01/2012
- Message n°34
Re: Stranger Bust Size
For me they must remain the same size. As mortal enemies they must do battle on an even playing field as they are designed to be displayed together or perhaps as "bookends" for a cosmic display.
This picture is a FS Hard Hero that I cut down with the idea he could be converted to the Stranger. His torso is 5.15" (13.1cm) tall. The box is 3 inches tall. So he stands right at 8" tall. This is 1/2 inch shorter than the size I plan for Stranger and Overmind. They will look very large next to other busts.
Even if I had a list of 20 people saying they would buy a Surtur sized bust of the Stranger, it is simply a financial risk I am unwilling to take.
P.S. I like what I see of your collection AP. Do you have a collection thread here?
This picture is a FS Hard Hero that I cut down with the idea he could be converted to the Stranger. His torso is 5.15" (13.1cm) tall. The box is 3 inches tall. So he stands right at 8" tall. This is 1/2 inch shorter than the size I plan for Stranger and Overmind. They will look very large next to other busts.
Even if I had a list of 20 people saying they would buy a Surtur sized bust of the Stranger, it is simply a financial risk I am unwilling to take.
P.S. I like what I see of your collection AP. Do you have a collection thread here?
jarvis69- Admin
- Nombre de messages : 17688
Age : 61
Date d'inscription : 31/01/2009
- Message n°35
Re: Stranger Bust Size
This size is perfect for me , no need to do it bigger .
__________________________________________________
Rody Siffrecco- Complétiste collector
- Nombre de messages : 3800
Date d'inscription : 16/12/2012
- Message n°36
Re: Stranger Bust Size
Yes I agree with that.
citizenalpha- Peintre / Painter
- Nombre de messages : 341
Age : 53
Localisation : Cypress, Texas
Date d'inscription : 02/01/2012
- Message n°37
Re: Stranger Bust Size
Here are a couple of sketched by Ydol. These are not representative of their poses. It was just an excercise to determine size and scale. They will be huge!
Deux croquis d'Adil. Ils ne sont pas représentatifs de la pose finale. C'est juste un exemple pour déterminer la taille et l'échelle . Ils vont être grands .
Deux croquis d'Adil. Ils ne sont pas représentatifs de la pose finale. C'est juste un exemple pour déterminer la taille et l'échelle . Ils vont être grands .
mimic- Ultime collector
- Nombre de messages : 5269
Age : 66
Localisation : saint-germain-en-laye
Date d'inscription : 31/01/2009
- Message n°38
Re: Stranger Bust Size
Just one word Kenn and Adil : perfect
jarvis69- Admin
- Nombre de messages : 17688
Age : 61
Date d'inscription : 31/01/2009
- Message n°39
Re: Stranger Bust Size
Deux beaux bébés
__________________________________________________
citizenalpha- Peintre / Painter
- Nombre de messages : 341
Age : 53
Localisation : Cypress, Texas
Date d'inscription : 02/01/2012
- Message n°40
Re: Stranger Bust Size
I just wanted to let everyone know that my costs for molding and casting has gone up since I did the Puma kit. With that in mind, I have decided to commission Overmind only if I can get 14 people to commit to the project. Verbal only of course, but please do not commit if you aren't 95% sure. This is not a break even number for me, but rather an exceptable loss threshold.
The Stranger will be produced either way. I should mention that I am estimating a price around $100 US per casting for both the Stranger and Overmind, give or take $5 depending on how much the molds and casting will cost me.
FYI - I will want 15 people to move forward with Sugar Man when the time comes as well. I'm sure he will be a considerable chunk of resin.
Traduction
Kenn nous informe que les couts de moulage ont augmentés depuis qu'il a proposé le Puma . Avec ceci a l'esprit , il a décidé de ne produire le buste d'Overmind ( Mastermind pour les français ) que si il y a au moins 14 personnes intéressées par ce projet . Un accord verbal est suffisant bien sur , mais seulement si vous étes certains a 95 % . Ce nombre est nécessaire pour qu'il ne perde pas trop d'argent dans l'histoire .
L'Etranger va etre produit de toute façon . Le prix estimé va étre de 100 $ ( a 5$ prés ...) pour chacun des deux bustes .
Le moment venu , le méme système va ètre mis en place pour Sugar Man avec une liste de 15 personnes . Ce kit devrait nécessité un bon paquet de résine ...
The Stranger will be produced either way. I should mention that I am estimating a price around $100 US per casting for both the Stranger and Overmind, give or take $5 depending on how much the molds and casting will cost me.
FYI - I will want 15 people to move forward with Sugar Man when the time comes as well. I'm sure he will be a considerable chunk of resin.
Traduction
Kenn nous informe que les couts de moulage ont augmentés depuis qu'il a proposé le Puma . Avec ceci a l'esprit , il a décidé de ne produire le buste d'Overmind ( Mastermind pour les français ) que si il y a au moins 14 personnes intéressées par ce projet . Un accord verbal est suffisant bien sur , mais seulement si vous étes certains a 95 % . Ce nombre est nécessaire pour qu'il ne perde pas trop d'argent dans l'histoire .
L'Etranger va etre produit de toute façon . Le prix estimé va étre de 100 $ ( a 5$ prés ...) pour chacun des deux bustes .
Le moment venu , le méme système va ètre mis en place pour Sugar Man avec une liste de 15 personnes . Ce kit devrait nécessité un bon paquet de résine ...
Galactus- Membre d'honneur
- Nombre de messages : 16675
Date d'inscription : 10/12/2008
- Message n°41
Re: Stranger Bust Size
Ravi de voir que le projet est en cours !
__________________________________________________
De toutes les créatures des immensités de l univers,aucune ne me ressemble.J étais là au début de l univers.Je serais la à sa fin.
jarvis69- Admin
- Nombre de messages : 17688
Age : 61
Date d'inscription : 31/01/2009
- Message n°42
Re: Stranger Bust Size
Personnes sérieusement intéressées par un buste de l'Etranger :
Persons seriously interested in Stranger's bust :
Persons seriously interested in Stranger's bust :
- Jarvis69
__________________________________________________
Galactus- Membre d'honneur
- Nombre de messages : 16675
Date d'inscription : 10/12/2008
- Message n°43
Re: Stranger Bust Size
Personnes sérieusement intéressées par un buste de l'Etranger :
Persons seriously interested in Stranger's bust :
Jarvis69
Galactus !!!!!
Persons seriously interested in Stranger's bust :
Jarvis69
Galactus !!!!!
__________________________________________________
De toutes les créatures des immensités de l univers,aucune ne me ressemble.J étais là au début de l univers.Je serais la à sa fin.
mimic- Ultime collector
- Nombre de messages : 5269
Age : 66
Localisation : saint-germain-en-laye
Date d'inscription : 31/01/2009
- Message n°44
Re: Stranger Bust Size
undefined a écrit:Personnes sérieusement intéressées par un buste de l'Etranger :
Persons seriously interested in Stranger's bust :
1 citizenalpha
2Jarvis69
3Galactus !!!!!
4Mimic
mimic- Ultime collector
- Nombre de messages : 5269
Age : 66
Localisation : saint-germain-en-laye
Date d'inscription : 31/01/2009
- Message n°45
Re: Stranger Bust Size
citizenalpha a écrit:I just wanted to let everyone know that my costs for molding and casting has gone up since I did the Puma kit. With that in mind, I have decided to commission Overmind only if I can get 14 people to commit to the project. Verbal only of course, but please do not commit if you aren't 95% sure. This is not a break even number for me, but rather an exceptable loss threshold.
The Stranger will be produced either way. I should mention that I am estimating a price around $100 US per casting for both the Stranger and Overmind, give or take $5 depending on how much the molds and casting will cost me.
FYI - I will want 15 people to move forward with Sugar Man when the time comes as well. I'm sure he will be a considerable chunk of resin.
kenn ,I absolutely want Stranger,as well Overmind and Sugarman ,so you can count me in for three of them ,not at 95 % but at 100%
micky willis- Admin
- Nombre de messages : 9145
Age : 47
Localisation : In the clouds
Date d'inscription : 11/12/2008
- Message n°46
Re: Stranger Bust Size
Personnes sérieusement intéressées par un buste de l'Etranger :
Persons seriously interested in Stranger's bust :
1 citizenalpha
2 Jarvis69
3 Galactus !!!!!
4 Mimic
5 micky willis
Persons seriously interested in Stranger's bust :
1 citizenalpha
2 Jarvis69
3 Galactus !!!!!
4 Mimic
5 micky willis
__________________________________________________
Das- Admin
- Nombre de messages : 5657
Date d'inscription : 16/11/2011
- Message n°47
Re: Stranger Bust Size
J'ai séparé le sujet en créant un nouveau pour Overmind, sinon ça va devenir le bazar dans les listes.
I've separated the topic, creating a new one for Overmind only, to be sure there will be no misunderstanding.
Overmind topic : https://www.marvelscustoms.net/t16986-overmind-bust-kit
I've separated the topic, creating a new one for Overmind only, to be sure there will be no misunderstanding.
Overmind topic : https://www.marvelscustoms.net/t16986-overmind-bust-kit
__________________________________________________
Das • Illustrator | Comic Book Artist | Independent Publisher
Das-Art.com • Mon Instagram • Mon Facebook
citizenalpha- Peintre / Painter
- Nombre de messages : 341
Age : 53
Localisation : Cypress, Texas
Date d'inscription : 02/01/2012
- Message n°48
Re: Stranger Bust Size
Thank you, Das!
And just to be clear, only the Overmind's production will be determined by buyer interest. I will be producing the Stranger whether 20 people or 2 people commit, but feel free to continue the list for the Stranger. That way I know who to MP when he is ready
And just to be clear, only the Overmind's production will be determined by buyer interest. I will be producing the Stranger whether 20 people or 2 people commit, but feel free to continue the list for the Stranger. That way I know who to MP when he is ready
Nightstar1441- Statues collector
- Nombre de messages : 217
Age : 53
Localisation : South Carolina
Date d'inscription : 22/01/2012
- Message n°49
Re: Stranger Bust Size
You know you can add me in for both
ydol- Sculpteur / Sculptor
- Nombre de messages : 415
Age : 48
Date d'inscription : 09/02/2009
- Message n°50